TM 5-3895-373-34
2.31
REPLACE PUMP PILOT CONTROL VALVE.
This task covers:
a.
Remove
b.
Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 106, Appendix D)
TM 5-3895-373-24P
O-ring tool (Item 103, Appendix D)
Equipment Condition:
Materials/Parts:
Right access door open per TM 5-3895-373-10.
Cleaning cloth (Item 6, Appendix B)
Right access cover removed per TM 5-3895-373-10.
Electrical insulating compound (Item 10, Appendix B)
Front top right access door open per TM 5-3895-373-10.
Lint-free cloth (Item 7, Appendix B)
Petrolatum (Item 24, Appendix B)
Preformed packings
Pump pilot control valve
NOTE
Refer to the illustration for the location of
the pump pilot control valves on both the
right and left propulsion pumps. The
procedures given are for the right
propulsion pump. Procedures for the
left propulsion pump are identical.
A.
REMOVE.
1.
REMOVE PUMP PILOT CONTROL VALVE FROM
ELECTRONIC DISPLACEMENT CONTROL.
a.
Disconnect harness electrical connector (1) from
pump pilot control valve (2) electrical connector
(3).
GO TO NEXT PAGE
2-438
