TM 5-3895-373-34
G.
ADJUST - Continued.
d.
Remove plugs (130 and 131) from servo ports
(132 and 133).
NOTE
Use 10, 000 psi (690 BAR) pressure gauges for
this procedure.
e.
Install pressure gauges into servo ports (132 and
133).
f.
Start paving machine. Refer to TM 5-3895-373-
10.
g.
With the throttle control set at IDLE, allow
hydraulic system to reach normal operating
temperature. Refer to TM 5-3895-373-10.
GO TO NEXT PAGE
2-433
