TM 5-3895-373-34
2.30
REPLACE/REPAIR PROPULSION PUMP - Continued.
F.
INSTALL - Continued.
f.
Remove
hydraulic
oil
temperature
sensor
knurled nut (3) and install harness ring terminal
(4). Install knurled nut.
Electrical insulating varnish fumes can be
harmful if inhaled. Use only in a well ventilated
area. Avoid prolonged exposure to fumes. If
personnel become dizzy or drowsy during use,
get immediate medical attention.
g.
Apply electrical insulating varnish to hydraulic oil
temperature sensor knurled nut (3) and ring
terminal.
h.
Apply electrical insulating compound to male
terminals of harness electrical connector (2).
i.
Connect pump pilot control valve electrical
connector (1) to harness electrical connector (2).
GO TO NEXT PAGE
2-430
