TM 5-3895-373-34
E.
ASSEMBLE - Continued.
19.
INSTALL HYDRAULIC FITI’INGS ONTO LEFT
PROPULSION PUMP.
a.
Remove protective caps.
b.
Lubricate preformed packings (26, 28, 31, 32,
and 34) with petrolatum.
Be careful not to damage preformed packing
when sliding over threads. Sharp edges of
thread can cut or damage preformed packing.
Damaged preformed packing will cause leakage
and affect performance.
c.
Install preformed packings (34) onto straight
adapters (33). Install and tighten straight
adapters, using combination wrench (Item 116,
Appendix D).
d.
Install preformed packings (31 and 32) onto
straight adapters (29 and 30). Install and tighten
straight adapters.
e.
Install preformed packing (28) into packing
grooves of elbow (27). Screw elbow in until
packing meets packing seat in mating port. Aim
elbow as shown in illustration and tighten locking
nut.
f.
Install preformed packing (26) into packing
grooves of elbow (25). Screw elbow in until
packing meets packing seat in mating port. Aim
elbow as shown in illustration and tighten locking
nut, using combination wrench (Item 116,
Appendix D).
GO TO NEXT PAGE
2-427
