TM 5-3895-373-34
2.30
REPLACE/REPAIR PROPULSION PUMP - Continued.
E.
ASSEMBLE Continued.
9.
INSTALL BEARING, PUMP SHAFT, AND SLEEVE
BEARING.
Use care when installing retaining rings.
Retaining rings are under spring tension
and can act as projectiles when released
and could cause severe eye injury.
a.
Install retaining ring (95) onto pump shaft (91)
retaining ring groove.
b.
Place bearing (92) over pump shaft.
c.
Use hydraulic press frame to install bearing (92)
onto pump shaft (91) until seated.
d.
Install retaining ring (94) onto pump shaft
retaining ring groove.
e.
Install bearing and pump shaft into front cover
(83).
f.
Use snap ring pliers and install retaining ring (90)
into front cover.
g.
Lubricate bronze side of sleeve bearings (93)
with petrolatum.
h.
Install sleeve bearings (93) onto front cover.
GO TO NEXT PAGE
2-420
