TM 5-3895-373-34
A.
DISASSEMBLE - Continued.
2.
REMOVE BRUSHES, BRUSH SPRINGS, AND
BRUSH HOLDER ASSEMBLY FROM FRAME AND
BRUSH ASSEMBLY.
a.
Hold brush holder assembly (16) away from
frame/field assembly (17) to access screws (18).
b.
Remove screws (18) and lockwashers (19) from
frame/field assembly (17). Discard lockwashers.
Remove brush holder assembly (16) from frame/field
assembly.
c.
Remove brush screws (20) and lockwashers
(21) from brush holder assembly (16). Discard
lockwashers.
d.
Use needle nose pliers to move brush springs
(22) away from brush sockets (23) on brush
holder assembly (16).
e.
Remove grounded brushes (24) and insulated
brushes (25).
f.
Remove brush spring (22) by sliding off of post.
GO TO NEXT PAGE
2-339
