TM 5-3895-373-34
2.19
REPLACE/REPAIR FUEL INJECTION PUMP - Continued.
A.
REMOVE - Continued.
Fuel is very flammable and can explode
easily.
To
avoid
serious
injury
or
death:
Always wear safety glasses/goggles at
all times.
Keep fuel away from open flame or any
spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with fuel
or on a fuel system.
Do not work on fuel system when engine
is hot; fuel can be ignited by a hot
engine.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
2.
REMOVE
FUEL
INJECTION
PUMP
FROM
ENGINE.
Fuel injection pump gear must not be
allowed to move from its position when
fuel injection pump is removed from
timing gear case. Do not turn engine
over or allow timing gear to move in any
way
when
fuel
injection
pump
is
removed.
Erratic
operation
and
equipment damage may result from
misalignment of fuel injection pump gear
inside timing gear case.
a.
Remove hex nuts (13), lockwashers (14), and
flat washers (15). Discard lockwashers.
b.
Pull fuel injection pump (16) from engine timing
gear case.
c.
Remove and discard gasket (17).
GO TO NEXT PAGE
2-250
