TM 5-3895-373-34
A.
REMOVE.
Fuel is very flammable and can explode
easily. To avoid serious injury or death:
Always wear safety glasses/goggles at
all times.
Keep fuel away from open flame or any
spark (ignition source).
Keep at least a B-C fire extinguisher
within easy reach when working with fuel
or on a fuel system.
Do not work on fuel system when engine
is hot; fuel can be ignited by a hot
engine.
Post signs that read "NO SMOKING
WITHIN 50 FEET" when working with
open fuel lines or fuel tanks.
I.
REMOVE TACHOMETER GENERATOR FROM
ENGINE.
a.
Tag
and
disconnect
tachometer
generator
electrical connector (1) from engine harness
connector (2).
b.
Unscrew swivel nut (3) and remove tachometer
generator (4).
c.
Remove
hex
head
cap
screws
(5)
and
lockwashers (6). Discard lockwashers.
d.
Remove tachometer drive angle (7), key (8), and
gasket (9). Discard gasket.
Do not drop any parts or foreign material
into fuel injection pump gear housing
during fuel injection pump removal.
Serious engine damage may occur.
Insert a clean, lint-free cloth into space
around adapter to ensure nothing enters
fuel injection pump housing.
e.
Remove hex head cap screws (10) and flat
washers (11).
f.
Remove adapter (12).
GO TO NEXT PAGE
2-249
