TM 5-3895-373-34
E.
INSTALL - Continued.
c.
Lubricate camshaft (122) with clean engine oil.
Camshaft is machined to precise
tolerances. Do not bump camshaft
against
engine
block
during
installation. Damage to camshaft and
engine may result from nicks or dents
in camshaft surface.
d.
Install camshaft (122) into engine block.
e.
Lubricate camshaft thrust washer (120) with
clean engine oil.
f.
Install camshaft thrust washer (120), with hole
for dowel (121) aligned with hole in engine block.
g.
Install dowel (121) until flush with surface of
camshaft thrust washer.
h.
Place a steel machinist’s rule across face of
camshaft thrust washer (120).
i.
Use a thickness gage to check camshaft thrust
washer (120) protrusion beyond front face of
engine
block.
Camshaft
thrust
washer
protrusion must be 0.026 to 0.031 in. (0, 66 to 0,
79 mm).
GO TO NEXT PAGE
2-213
