TM 5-3895-373-34
2.17
DIESEL ENGINE REPAIR - Continued.
E.
INSTALL - Continued.
Uncured gasket sealing compound
can
cause
eye
damage
or
skin
irritation. Avoid contact with eyes
and skin. If compound contacts eyes,
flush eyes with water for 15 minutes
and get immediate medical attention.
If sealing compound contacts skin,
remove from skin with a dry cloth or
paper towel and wash thoroughly
with
soap
and
water.
Sealing
compound releases acetic acid while
curing.
Use
with
adequate
ventilation.
t.
Apply a thin coat of gasket sealing compound to
both sides of gasket (130).
u.
Install gasket (130).
v.
Lubricate new crankshaft seal (131) with engine
oil.
w.
Install crankshaft seal housing (129), securing
with flat washers (125) and screws (128).
Tighten screws.
x.
Install flat washers (125) and socket head cap
screws (124). Tighten socket head cap screws.
3.
INSTALL MAIN BEARING THIMBLES AND
CAMSHAFT INTO ENGINE BLOCK.
a. Lubricate main bearing thimbles (123) with clean
engine oil.
NOTE
Main
bearing
thimbles
must
be
installed in engine block in the same
order in which they were removed.
b.
Install main bearing thimbles (123) into engine
block, in the same order in which they were
removed.
GO TO NEXT PAGE
2-212
