TM 5-3895-373-34
2.77
REPLACE/REPAIR SCREED VIBRATION FLOW DIVIDER - Continued.
C.
CLEAN - Continued.
Compressed air used for cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
guarding
and
personal
protective
equipment (goggles/face shield and
gloves). Failure to take proper
precautions may result in severe
injury or loss of vision.
2.
USE 30 PSI (207 kPa) MAXIMUM COMPRESSED
AIR TO BLOW ANY FOREIGN MATERIAL FROM
INSIDE OF BODY, SPOOL, AND THREADED
SURFACES. DRY PARTS WITH A CLEAN, LINT-
FREE CLOTH.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
3.
CLEAN
BOLTS
WITH
THREAD
LOCKING
COMPOUND SOLVENT. WIPE DRY WITH A
CLEAN, LINT-FREE CLOTH.
D.
INSPECT.
1.
INSPECT BODY.
a.
Inspect body (11I), surface A, visually for
cracks and stripped threads. Use a strong
light and inspect body interior B for foreign
material.
b.
Replace entire screed vibration flow divider if
cracks or stripped threads are detected.
GO TO NEXT PAGE
2-1088
