TM 5-3895-373-34
B.
DISASSEMBLE.
1.
REMOVE ELBOWS, PLUGS, AND PREFORMED
PACKINGS FROM BODY.
a.
Remove elbows (5) from body (11).
b.
Remove plugs (12) and preformed packings
(13) from body. Discard preformed packings.
2.
REMOVE SPOOL FROM BODY.
a.
Turn body (11) on its side.
b.
Remove spool (14) from inside of body (11).
C.
CLEAN.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
RINSE ALL METAL PARTS IN CLEANING
SOLVENT. FLUSH BODY (11) WITH CLEANING
SOLVENT.
USE
A
CULTURE
SWAB
TO
REMOVE ANY MATERIAL
FROM
INTERIOR
SCREED
VIBRATION
FLOW
DIVIDER
PASSAGES B.
GO TO NEXT PAGE
2-1087
