TM 5-3895-373-34
2.77
REPLACE/REPAIR SCREED VIBRATION FLOW DIVIDER.
E.
ASSEMBLE - Continued.
2.
INSTALL PREFORMED PACKINGS, PLUGS, AND
ELBOWS ONTO BODY.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a.
Lubricate
preformed
packings
(13)
with
hydraulic oil prior to installing on plugs (12).
Be careful not to damage preformed
packing when sliding over threads.
Sharp edges of thread can cut or
damage
preformed
packing.
Damaged
preformed
packing
will
cause
leakage
and
affect
performance.
b.
Install preformed packings (13) on plugs (12).
c.
Thread plugs (12) into body (11). Tighten
plugs.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
flush
eyes
with
water
and
get
immediate medical attention.
d.
Apply pipe sealant to pipe thread ends of
elbows (5).
e.
Install elbows (5) onto body. Tighten until
positioned correctly for reinstallation. Refer to
illustration.
GO TO NEXT PAGE
2-1090
