TM 5-3895-373-34
D.
INSPECT - Continued.
2.
INSPECT SPOOL.
a.
Inspect spool (14), surfaces C, visually for
grooves and excessive wear.
b.
Inspect spool bore D for foreign material. If
foreign material is found clean spool bore D
with a pipe cleaner to remove any foreign
material. Ensure bore passages are clear.
c.
Fit spool (14) into body bore. Spool should fit
snug and require slight pressure to insert into
body bore.
d.
If spool is loose or has grooves worn in it,
replace entire screed vibration flow divider.
E.
ASSEMBLE.
1.
INSTALL SPOOL INTO BODY.
a.
Insert spool (14) into body (11).
b.
Ensure spool (14) is centered in body (11).
GO TO NEXT PAGE
2-1089
