TM 5-3895-373-34
D.
ASSEMBLE - Continued.
5.
INSTALL
ELBOWS
AND
PREFORMED
PACKINGS.
Hydraulic oil can be moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a.
Apply a light coating of hydraulic oil onto
preformed packings (3).
Use
caution
when
installing
preformed packings over threads.
Threads
can
cut
and
damage
preformed packings. Ensure threads
do not damage preformed packings
during installation.
b.
Install preformed packings (3) onto elbows (2).
c.
Screw elbows (2) into mating motor port until
preformed packings (3) seat in packing
recess.
d.
Adjust threaded end of elbows (2) to position
shown
for
screed
vibration
motor
being
assembled. Tighten lock nut (1).
NOTE
FOLLOW-ON-TASK:
Screed vibration motor installed per TM 5-3895-373-10.
END OF TASK
2-1083
