TM 5-3895-373-34
A.
REMOVE - Continued.
NOTE
The
remainder
of
main
screed
vibrator references, unless otherwise
indicated, pertain to the motorside
vibrator. Procedures for the left-side
vibrator are the same with exception
that the left side vibrator has a
retainer plate and bearing plate in
place of a motor mount. Also, the
left-side vibrator drive shaft is not
keyed.
2.
REMOVE MOTOR MOUNT, RETAINER PLATE,
AND BEARING PLATE.
a.
Remove socket head cap screws (5) and
lockwashers (6). Discard lockwashers.
b.
Remove motor mount (7) from vibrator housing
(8).
c.
Remove socket head cap screws (9) and
lockwashers (10). Discard lockwashers.
d.
Remove retainer plate (11).
e.
Remove bearing plate (12), spacer (13), drive
shaft (4), and eccentric shaft (14) from vibrator
housing (8).
f.
Remove spring pins (15) and eccentric shaft (14)
from drive shaft (4).
g.
Remove spacer (13) and bearing plate (12) from
drive shaft (4).
GO TO NEXT PAGE
2-1059
