TM 5-3895-373-34
2.74
REPLACE MAIN SCREED VIBRATOR COMPONENTS.
A.
REMOVE.
1.
REMOVE
UNIVERSAL
JOINT
FROM
DRIVE
SHAFTS.
a
Remove spring pins (1) from universal joint (2)
and drive shafts (3 and 4) using a 3/8 inch drive
pin punch and pliers. Discard spring pins.
b.
Free universal joint from one of the drive shafts
by pushing one end of universal joint toward the
center. Use a large screwdriver to pry end of
universal joint off of drive shaft if necessary.
c.
Remove universal joint (2) from paving machine.
GO TO NEXT PAGE
2-1058
