TM 5-3895-373-2014.2.REPLACE BURNER AND FUEL SPRAY FUEL PUMP AND MOTOR - Continued.A.REMOVE - Continued.2.REMOVE MOTOR FROM MOUNTINGBRACKET.a.Remove hex nuts (13) securing motor (14) tomounting bracket (15). Remove motor.b.Loosen set screw (16) and remove couplingbody (17) from motor (14).NOTENeoprene insert (18) may remain witheither motor coupling body or fuelpump coupling body.c.Remove neoprene insert (18) from couplingbody (17).3.REMOVE FUEL PUMP FROM MOUNTINGBRACKET.a.Remove hex head cap screws (19) and hex nuts(20) securing fuel pump (21) to mounting bracket(15). Remove fuel pump.b.Loosen set screw (22) and remove couplingbody (23) from fuel pump (21).c.Remove elbows (3 and 4) from fuel pump.B.INSTALL.1.INSTALL FUEL PUMP ONTO MOUNTINGBRACKET.a.Use cleaning cloth to wipe residue from threadsof elbows (3 and 4).Pipe sealant can cause eye damageor skin irritation. Wash after skincontact. Wear safety goggles/glasseswhen using. Avoid contact with eyesor skin. If sealant contacts eyes,flush eyes with water and getimmediate medical attention.b.Apply pipe sealant to pipe threads of elbows (3and 4).GO TO NEXT PAGE14-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
