TM 5-3895-373-20B.INSTALL - Continued.3.INSTALL FUEL PUMP AND MOTORASSEMBLY.WARNINGThread locking compound solventcan cause eye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If solvent contactseyes, flush eyes with water and getimmediate medical attention.a.Clean threads of hex head cap screws (10)with thread locking compound solvent. Drythreads with lint-free cloth.b.Install lockwashers (11) onto hex head capscrews (10).WARNINGThread locking compound can causeeye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If compoundcontacts eyes, flush eyes with waterand get immediate medical attention.c.Apply thread locking compound (Item 12,Appendix C) to threads of hex head capscrews (10).d.Place fuel pump and motor assembly (12)into position in paving machine. Securewith hex head cap screws (10). Tightencap screws to 37 lb-ft (50 N•m).WARNINGHydraulic fitting sealant can causeeye damage or skin irritation. Washafter skin contact. Wear safetygoggles/glasses when using. Avoidcontact with eyes or skin. If sealantcontacts eyes, flush eyes with waterand get immediate medical attention.e.Apply hydraulic fitting sealant to threads ofelbows (3 and 4).f.Connect hoses (5) to elbows (3 and 4).Tighten hoses.g.Apply electrical insulating compound tomale end of electrical connector (2) andplug into power supply harness connector.GO TO NEXT PAGE14-7
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business