TM 5-3895-373-20
B.
INSTALL - Continued.
c.
Install elbows (3 and 4) onto fuel pump (21).
Position elbows so that when fully tightened
they point straight up.
d.
Install coupling body (23) onto fuel pump
(21) shaft. Make sure that coupling body
set screw (22) aligns with flat on pump
shaft; tighten set screw.
WARNING
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
e.
Clean threads of hex head cap screws (19)
with thread locking compound solvent. Dry
threads with lint-free cloth.
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
f.
Apply thread locking compound (Item 12,
Appendix C) to threads of hex head cap
screws (19).
g.
Position fuel pump (21) onto mounting
bracket (15). Secure with hex head cap
screws (19) and hex nuts (20).
h.
Tighten hex nuts (20) to 37 lb-ft (50 N•m).
GO TO NEXT PAGE
14-5
