TM 5-3895-373-20B. INSTALL Continued.Pipe sealant can cause eye damage or skin irritation.Wash after skin contact. Wear safety goggles/glasseswhen using. Avoid contact with eyes or skin. If sealantcontacts eyes, flush eyes with water and get immediatemedical attention.e.Apply pipe sealant to external pipe threads of tee(13).f.Install tee (13) and tighten so that relief valveport faces away from tow point cylinder (3).g.Apply pipe sealant to threads of relief valve (12)and pipe reducer (11). Install and tighten reliefvalve and reducer into tee (13). A secondwrench may be necessary to hold tee whileinstalling relief valve and reducer.h.Install globe valve (9) and tighten so that knobfaces out from paving machine when tow pointcylinder is installed. Refer to tow point cylinderassembly diagram.i.Apply pipe sealant to pipe threads of elbow (10).Install and tighten elbow so that it points in toward pavingmachine when cylinder is installed.Refer to tow point cylinder assemblydiagram.j.Rotate assembled valves and fittings to alignwith cylinder as shown in tow point cylinderassembly diagram. Tighten lock nut on elbow(8).GO TO NEXT PAGE13-7
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
