TM 5-3895-373-20
13.2.
REPLACE TOW POINT CYLINDER - Continued.
A.
REMOVE - Continued.
NOTE
Adjust screed thickness control to
relieve any tension on tow point
cylinder. This will make cylinder
removal
easier
and
lessen
the
amount of hydraulic oil lost.
c.
Adjust screed thickness control per TM 5-
3895-373-10 to null or to a position that
relieves any tension on tow point cylinder
(3).
WARNING
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
d.
Place
machinery
wiping
towels
under
hydraulic
hoses
(1
and
2)
being
disconnected. This will catch any hydraulic
oil that leaks from hoses.
e.
Disconnect hydraulic hoses (I and 2). Plug
hose ends.
GO TO NEXT PAGE
13-4