TM 5-3895-373-20B. INSTALL Continued.2. INSTALL TOW POINT CYLINDER.a.Position tow point cylinder (3) so that hole inbase of cylinder aligns with mounting bracket inframe. Install clevis pin (7) and retaining clips(6).b.Extend piston rod so that holes on rod end clevisalign with hole in screed tow arm. Install clevispin (4).Thread locking compound solvent cancause eye damage. Wear safetygoggles/glasses when using. Avoidcontact with eyes. If solvent contactseyes, flush eyes with water and getimmediate medical attention.c.Clean hex head cap screws (5) with threadlocking compound solvent. Wipe dry with lint-freecloth.Thread locking compound can causeeye damage. Wear safetygoggles/glasseswhen using. Avoidcontact with eyes. If compound contactseyes, flush eyes with water and getimmediate medical attention.d.Coat hex head cap screw (5) threads with threadlocking compound.e.Install hex head cap screw (5). Tighten to 37 lb-ft(50 N•m).GO TO NEXT PAGE13-9
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
