TM 5-3895-373-20
A.
REMOVE.
1.
DISCONNECT HOSES.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
CAUTION
Thoroughly clean hydraulic hoses
and fittings before disconnecting.
Always plug or cap off disconnected
fittings
to
prevent
intrusion
of
contaminates. Failure to properly
clean and cap off connectors may
result
in
hydraulic
system
contamination
and
equipment
damage.
a.
Use cleaning solvent and cleaning cloth to
clean around hydraulic hose (1 and 2)
fittings on tow point cylinder (3).
b.
Tag hydraulic hoses (1 and 2) to ensure
installation in the same location during
installation of tow point cylinder.
GO TO NEXT PAGE
13-3
