TM 5-3895-373-20
13.2.
REPLACE TOW POINT CYLINDER.
This task covers:
a. Remove
b. Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 54, Appendix E)
TM 5-3895-373-24P
Torque wrench (Item 68, Appendix E)
Utility pail (Item 26, Appendix E)
Equipment Conditions:
Screed lowered per TM 5-3895-373-10.
Materials/Parts:
Left access cover removed per TM 5-3895-373-10
Cleaning cloth (Item 7, Appendix C)
(for replacement of left tow point cylinder).
Cleaning solvent (Item 24, Appendix C)
Right access cover removed per TM 5-3895-373-10
Hydraulic fitting sealant (Item 21, Appendix C)
(for replacement of right tow point cylinder).
Hydraulic oil (Item 18, Appendix C)
Lint-free cloth (Item 8, Appendix C)
Machinery wiping towels (Item 30, Appendix C)
Pipe sealant (Item 22, Appendix C)
Protective caps (Item 5, Appendix C)
Tags (Item 27, Appendix C)
Thread locking compound (Item 12, Appendix C)
Thread locking compound solvent (Item 25, Appendix C)
Preformed Packings
Tow point cylinder
NOTE
There is a left hand and a right hand
tow point cylinder on the paving
machine. This procedure refers to
replacing left hand tow point cylinder.
Procedure is identical for right hand
tow
point
cylinder
except
for
direction of hydraulic fittings. Left
hand
and
right
hand
tow
point
cylinders
are
referenced
during
installation of hydraulic fittings.
GO TO NEXT PAGE
13-2
