TM 5-3895-373-20
B.
INSTALL.
1.
INSTALL SLOW MOVING VEHICLE SIGN.
a.
Install mounting bracket (10) and hex nuts
(9).
WARNING
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
b.
Clean threads of hex head cap screws (3
and 7) with thread locking compound
solvent and cleaning cloth.
c.
Install flat washers (6 and 2) onto hex head
cap screws (7 and 3).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
d.
Apply thread locking compound to threads
of hex head caps screws (7 and 3).
e.
Install mounting bracket (8), hex head cap
screws (7), and hex nuts (5). Tighten hex
nuts to 9 lb-ft (12 N•m).
f.
Install hex head cap screws (3) through
slow moving vehicle sign (4) and installed
mounting bracket (8).
g.
Install remaining two flat washers (2) and
hex nuts (1). Tighten hex nuts to 9 lb-ft (12
N•m).
2.
INSTALL
BONDED
(ADHESIVE-BACKED)
DATA PLATE.
a.
Peel backing paper from adhesive backing
of data plate.
b.
Line up data plate on scribed outline of
original data plate mounting location.
c.
Press data plate evenly and firmly onto
mounting surface.
GO TO NEXT PAGE f
12-13
