TM 5-3895-373-20
12.3.
REPLACE EQUIPMENT DATA PLATES - Continued.
A.
REMOVE - Continued.
WARNING
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Use cleaning cloths and cleaning solvent to
remove adhesive residue from data plate
mounting surface.
4.
REMOVE SLOW MOVING VEHICLE SIGN.
NOTE
The
following
procedure
covers
removal of a slow moving vehicle
sign and related mounting brackets.
Perform only those steps needed to
replace damaged components.
a.
Remove hex nuts (1), flat washers (2), hex
head cap screws (3), and slow moving
vehicle sign (4).
b.
Remove hex nuts (5), flat washers (6), hex
head cap screws (7), and mounting bracket
(8).
c.
Remove hex nuts (9) and mounting bracket
(10).
GO TO NEXT PAGE
12-12
