TM 5-3895-373-20
8.2.
REPLACE HYDRAULIC OIL COOLER - Continued.
A.
REMOVE - Continued.
3.
REMOVE HYDRAULIC OIL COOLER FROM
ENGINE COMPARTMENT.
WARNING
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a.
Using 1-3/8 in. and 1-1/2 in. combination
wrenches, secure straight adapters (7)
and disconnect hose (4) and inlet tube (8)
from hydraulic oil cooler (2). Cap off open
hose, oil cooler, and tube fittings with
protective caps.
b.
While supporting hydraulic oil cooler (2),
remove
hex
head
cap
screws
(9),
lockwasher (10), and flat washer (11).
Discard lockwashers.
c.
From front top left access opening, lift
hydraulic oil cooler (2) out of engine
compartment.
d.
Remove straight adapters (7) and pipe
plugs (12) from hydraulic oil cooler (2).
Cap off open ports with protective caps.
GO TO NEXT PAGE
8-4
