TM 5-3895-373-20
A.
REMOVE - Continued.
5.
LOOSEN
AND
REMOVE
CLAMPS,
CONDUIT
MOUNTING
FLANGE,
AND
CONDUIT.
a.
Remove hose clamps (42) and conduit
mounting flange (43) from conduit (44).
b.
Place electrical connectors (9 through 18)
inside end of conduit (44).
CAUTION
Do not use excessive force when
removing
conduit
from
wiring
harnesses.
Damage
to
electrical
connectors and wires may result from
excessive force on wiring harnesses.
Pull wiring harnesses and electrical
connectors one at a time carefully
through
conduit
when
removing
conduit.
c.
Carefully
pull
electrical
connector
(9
through 18) harnesses through conduit
one at a time. Use caution not to damage
electrical connectors, or pull wires out of
electrical connectors.
GO TO NEXT PAGE
7-29
