4. REMOVE GAUGE PANEL LEFT AND RIGHT ACCESS DOORS, DOOR SEALS, COVER PLATE, AND COVER PLATE SEAL

3. REMOVE CLAMP CAPS, OPERATOR CONTROL CONSOLE, AND GUIDE SHAFT FROM CONSOLE SUPPORTS

5. LOOSEN AND REMOVE CLAMPS, CONDUIT MOUNTING FLANGE, AND CONDUIT

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
670

TM 5-3895-373-20 7.6. REPAIR/REPLACE OPERATOR CONTROL CONSOLE ASSEMBLY - Continued. A. REMOVE - Continued. 4. REMOVE GAUGE PANEL LEFT AND RIGHT ACCESS DOORS, DOOR SEALS, COVER PLATE, AND COVER PLATE SEAL. a. Open gauge panel left and right access doors (32 and 33) per TM 3895-373-10. b. Remove hex nuts (34), flat washers (35), and screws (36). c. Remove gauge panel left access door (32) and gauge panel right access door (33). d. Remove door seals (37 and 38) from gauge panel left and right access doors. Discard foam rubber door seals. e. Remove button head cap screws (39) from cover plate (40). Remove cover plate. f. Remove cover plate seal (41) from cover plate (40). Discard panel seal. GO TO NEXT PAGE 7-28

Privacy Statement
Press Release
Contact