d. Remove hex nut

9. REMOVE CIRCUIT BREAKER, TERMINAL, AND POWER RELAY FROM RELAY MOUNTING BRACKET

10. REMOVE HANDLE, SPRING, BRAKE SHOE, CLAMP MOUNTING BRACKET, AND CONDUIT BRACKET FROM CONTROL CONSOLE ASSEMBLY

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
676

TM 5-3895-373-20 7.6. REPAIR/REPLACE OPERATOR CONTROL CONSOLE ASSEMBLY - Continued. A. REMOVE - Continued. d. Remove hex nut (88), flat washer (89), wire 41 (90), wire 40 (91), and wire 141 (92) from power relay (93). Tag wires. e. Remove hex nuts (94), lockwashers (95), wire 48 (96), and ground wire (97) from power relay (93). Tag wire. f. Remove hex nut (98), flat washer (99), wire 48 (96), and terminal (100). Tag wire. g. Remove button head cap screws (101), power relay (93), and ground wire (102) from relay mounting bracket (87). GO TO NEXT PAGE 7-34

Privacy Statement
Press Release
Contact