8. REMOVE RELAY AND CIRCUIT BREAKER ASSEMBLY AND ASSEMBLED RELAY MOUNTING BRACKET FROM OPERATOR CONTROL CONSOLE

7. REMOVE SWITCH PANEL ASSEMBLY AND PANEL SEAL FROM OPERATOR CONTROL CONSOLE

9. REMOVE CIRCUIT BREAKER, TERMINAL, AND POWER RELAY FROM RELAY MOUNTING BRACKET

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
674

TM 5-3895-373-20 7.6. REPAIR/REPLACE OPERATOR CONTROL CONSOLE ASSEMBLY - Continued. A. REMOVE - Continued. f. Remove switch panel assembly (67) and harness from operator control console (8). g. Remove panel seal (75). Discard panel seal. 8. REMOVE RELAY AND CIRCUIT BREAKER ASSEMBLY AND ASSEMBLED RELAY MOUNTING BRACKET FROM OPERATOR CONTROL CONSOLE. a. Remove button head cap screws (76), hex nuts (77), and flat washers (78). b. Remove button head cap screws (79) from assembled relay mounting bracket (80). c. Remove relay and circuit breaker assembly (81) and assembled relay mounting bracket (80) from operator control console (8). GO TO NEXT PAGE 7-32

Privacy Statement
Press Release
Contact