TM 5-3895-373-20
7.3.
REPLACE FIELD RELAY.
This task covers:
a.
Remove
b.
Install
INITIAL SETUP
Tools:
Reference:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 54, Appendix E)
TM 5-3895-373-24P
Materials/Parts:
Equipment Condition:
Electrical insulating compound (Item 11, Appendix C)
Rear top left access door open per TM 5-3895-373-10.
Electrical insulating varnish (Item 32, Appendix C)
Thread locking compound (Item 13, Appendix C)
Thread locking compound solvent (Item 25, Appendix C)
Field relay
A.
REMOVE.
1.
REMOVE HARNESS CONNECTOR (1) FROM
FIELD RELAY (2).
2.
REMOVE HEX NUT (3), FLAT WASHER (4),
AND GROUND WIRE (5).
3.
REMOVE SOCKET HEAD CAP SCREW (6).
4.
REMOVE FIELD RELAY (2). DISCARD FIELD
RELAY
IN
ACCORDANCE
WITH
LOCAL
PROCEDURES.
B.
INSTALL.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes,
flush
with
water
and
get
immediate medical attention.
1.
CLEAN THREADS OF SOCKET HEAD CAP
SCREW (6) WITH THREAD LOCKING
COMPOUND SOLVENT.
GO TO NEXT PAGE
7-12
