TM 5-3895-373-20
2.24.2. JACKING AND CRIBBING - Continued.
B.
REMOVE CRIBBING AND LOWER AFTER NON
TRACK MAINTENANCE Continued.
e.
Remove cribbing from under screed (and from
under paving machine frame if using single point
overhead lift. Lower paving machine onto
ground.)
f.
Position jacks under frame at rear of paving
machine and under frame at front of paving
machine.
g.
Evenly raise one side of paving machine.
Remove 9 in. x 14 in. x 3 ft cribbing and position
4 in. x 12 in. x 8 ft cribbing under paving
machine track.
h.
Lower weight of paving machine onto cribbing.
i.
Raise
other
side
of
paving
machine
by
positioning jacks under frame at front of paving
machine and under frame at rear of paving
machine.
j.
Remove 9 in. x 14 in. x 3 ft cribbing and position
4 in. x 12 in. x 8 ft cribbing under paving
machine track.
k.
Lower weight of paving machine onto cribbing.
GO TO NEXT PAGE
2-446
