2. RAISE AND CRIB PAVING MACHINE ON 14 IN. CRIBBING

C. JACKING AND CRIBBING FOR TRACK MAINTENANCE - Cont

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
493

TM 5-3895-373-20 2.24.2. JACKING AND CRIBBING - Continued. C. JACKING AND CRIBBING FOR TRACK MAINTENANCE Continued. 2. RAISE AND CRIB PAVING MACHINE ON 14 IN. CRIBBING. NOTE During these steps, the rear of the paving machine is raised, then the front is raised. a. Place both jacks under frame at rear of paving machine. Ensure cribbing is positioned under frame of paving machine with stop tight against rear of paving machine frame. Failure to correctly position cribbing can cause damage to the propulsion motors, gearbox, or auger flights. b. Evenly raise rear of paving machine and position 9 in. x 14 in. x 16 in. cribbing (Item 2, Appendix D) under rear of paving machine with short end under frame with stop tight against frame. Rear of cribbing should be clear of augers. c. Lower weight of paving machine onto cribbing. GO TO NEXT PAGE 2-450

Privacy Statement
Press Release
Contact