B. REMOVE CRIBBING AND LOWER AFTER NON-TRACK MAINTENANCE

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
488

TM 5-3895-373-20 A. JACKING AND CRIBBING FOR NONTRACK MAINTENANCE Continued. Do not open screed travel lock valve if anyone is near or under the screed. The screed can fall rapidly when the screed travel lock valve is opened. The falling screed can cause severe injury or death. i. Slowly open the screed travel lock valve and ease the weight of the screed onto the cribbing. Refer to TM 5-3895-373-10. j. Fully close the screed travel lock valve. k. Place ignition switch to the STOP position and remove the ignition key. Refer to TM 53895-373- 10. B. REMOVE CRIBBING AND LOWER AFTER NON-TRACK MAINTENANCE. NOTE If using single point overhead lift per paragraph 2.24.4, go to step 1.a through 1.e. 1. REMOVE 9 IN. X 14 IN. X 3 FT CRIBBING AND LOWER PAVING MACHINE. a. Start paving machine per TM 5-3895-373-10. b. Place throttle control switch to MAX position. c. Place screed lift switch to the up, RAISE position. Fully raise screed. Refer to TM 53895- 373-10. d. Shut down paving machine per TM 5-3895373- 10. GO TO NEXT PAGE 2-445

Privacy Statement
Press Release
Contact