TM 5-3895-373-20A.REMOVE Continued.e.Install plugs in hydraulic hoses and cap fittings incylinder ports.3.REMOVE HOPPER LIFT CYLINDER.a.Remove lock pin (10). Support hopper liftcylinder (6) and remove straight headed pin (11)and flat washers (12).Hydraulic oil can be moderatelyflammable and can be an irritant tothe skin, eyes, and respiratorysystem. Avoid prolonged exposure.Eye protection and rubber glovesmust be worn when working withhydraulic oil.b.Remove hopper lift cylinder. Remove protectivecaps from lift cylinder fittings and drain hydraulicoil into a drip pan. Dispose of waste hydraulic oilin accordance with local procedures.4.REMOVE FlTTINGS AND PLUGS.a.Remove plugs (13) and preformed packings (14)from hopper lift cylinder (6). Discard preformedpackings.b.Tag and remove straight adapters (15 and 16)and preformed packings (17 and 18). Discardpreformed packings.GO TO NEXT PAGE15-51
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
