TM 5-3895-373-20
B.
INSTALL - Continued.
NOTE
Installed outlet port adapter is an
orifice straight adapter. In order to
eliminate pressure inside the hopper
lift cylinder, it may be necessary to
remove outlet port straight adapter
before manually extending the lift
cylinder.
b.
Manually extend hopper lift cylinder piston rod.
Instruct a second person to position piston rod
end (20) for mounting on hopper wing.
c.
From inside hopper, guide a second person in
lining up piston rod end (20) bore with mounting
hole.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
d.
Apply thread locking compound to threads of
shoulder screw (5). Install shoulder screw and
tighten using hex head driver socket and socket
wrench adapter.
e.
Rotate the hopper lift cylinder so that ports (21)
are toward the outside of the paving machine
and the port fittings are pointed toward the rear
of the paving machine.
NOTE
The
hoist
may
need
to
be
repositioned to allow for alignment of
the hopper lift cylinder lower pin bore
and
installation
of
the
straight
headed pin.
f.
Place lower cylinder pin bore (22) into paving
machine mounting bracket (23).
g.
Install straight headed pin (11), flat washers (12),
and lock pin (10).
GO TO NEXT PAGE
15-53
