TM 5-3895-373-20
15.7.
ADJUST CONVEYOR CHAIN ASSEMBLY TENSION.
This task covers:
a. Remove
b. Adjust
c. Install
INITIAL SETUP
Tools:
Personnel Required:
General mechanic’s automotive tool kit
Two 62B construction equipment repairers. Second person
(Item 54, Appendix E)
needed to assist in lifting conveyor drag plate guard and
Socket wrench adapter (Item 3, Appendix E)
adjusting conveyor chain.
Socket wrench set (Item 71, Appendix E)
Torque wrench (Item 68, Appendix E)
References:
TM 5-3895-373-10
Material/Parts:
TM 5-3895-373-24P
Cleaning cloth (Item 7, Appendix C)
Thread locking compound (Item 12, Appendix C)
Equipment Condition:
Thread locking compound solvent (Item 25, Appendix C) Hopper wings fully lowered per TM 5-3895-373-10.
Flow gates fully open per TM 5-3895-373-10.
Paving machine jacked and cribbed per paragraph 2.24.2.
NOTE
There is a left hand and a right hand
conveyor chain assembly. This
procedure
addresses
the
left
hand
conveyor chain assembly. Procedure is
identical for right hand conveyor chain
assembly. Left hand conveyor chain
assembly is shown in this procedure.
A.
REMOVE.
1.
RAISE LEFT ACCESS DOOR (1), RIGHT
ACCESS DOOR (2), AND CENTER ACCESS
DOOR (3).
GO TO NEXT PAGE
15-55
