15.6. REPLACE HOPPER LIFT CYLINDER

1. RAISE HOPPER WING WITH OVERHEAD HOIST

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
1070

TM 5-3895-373-20 15.6. REPLACE HOPPER LIFT CYLINDER. This task covers: a. Remove b. Install INITIAL SETUP Tools: General mechanic’s automotive tool kit Personnel Required: (Item 54, Appendix E) Two 62B construction equipment repairers. Second person Chain assembly 2 ea (Item 3, Appendix E) needed for installing shoulder screw inside hopper. C-clamp, 2 ea (Item 10, Appendix E) Drip pan (Item 28, Appendix E) References: Hex head driver socket (Item 42, Appendix E) TM 5-3895-373-10 Socket wrench adapter (Item 2, Appendix E) TM 5-3895-373-24P Materials/Parts: Cleaning cloth (Item 7, Appendix C) Cleaning solvent (Item 24, Appendix C) Grease (Item 15. Appendix C) Hydraulic fitting sealant (Item 21, Appendix C) Hydraulic oil (Item 18, Appendix C) Protective caps (Item 5, Appendix C) Tags (Item 27, Appendix C) Thread locking compound (Item 12, Appendix C) Thread locking compound solvent (Item 25, Appendix C) GO TO NEXT PAGE 15-48

Privacy Statement
Press Release
Contact