TM 5-3895-373-10
c.
Pull up on the control handle release and slowly
move the control handles in the direction of
travel and set travel speed.
(1)
To travel forward, move both control
handles forward an equal amount.
(2)
To travel backward, move both control
handles backward an even amount.
(3)
To turn, move one control handle farther
than the other control handle.
(4)
To pivot the paving machine in place,
move one control handle forward and the
other
control
handle
backward
equal
distances at the same time.
2.13
LOADING THE HOPPER.
WARNING
Do not raise or lower hopper wings
when personnel are working around
the front of the machine. Unexpected
hopper wing raising or lowering can
cause serious injury. Ensure all
personnel are clear of hopper wings
before operating hopper wings.
a.
Fully lower the hopper wings by holding the
hopper wing switches in the down, LOWER
position.
2-36
