TM 5-3895-373-10
CAUTION
During removal of outer extension
screed plate, During removal of outer
extension screed plate, ensure that
the spacers and plate spacers around
the studs securing the screed plate to
the frame are not allowed to move or
fall from the stud. If spacers or plate
spacers are moved and not returned
to their initial position on the screed
plate, a full screed alignment is
required on installation of the outer
extension screed plate.
k.
Remove outer extension screed plate (21) by
removing self-locking nuts (22) and flat washers
(23). Carefully lower and remove extension
screed plate. If spacers or plate spacers fall off
of extension screed plate and cannot be
replaced to their original position, a full screed
alignment must be performed when installed.
l.Secure spacers (24 and 25) and plate spacers
(26) onto removed outer extension screed plate
(21) with flat washers (23) and self-locking nuts
(22).
2-84
