TM 5-3895-356-14&P
FLUSHING BAR, CIRCULATING SYSTEM AND TANK
Figure 28
1. After draining circulating system,
put quadrant control lever to
"Circulate m Bar" position
2. Intake valve lever should be in
Lit cigarettes or other sources of
3
Up position
combustion must remain clear of
open manholes or overflow vents
3. Run pump at low idle
to reduce fire hazard
4. Put 3 quarts of flushing oil in
Remain clear of rotating drives
5
filling line, using can provided If
when unit is in operation to prevent
tank is to be flushed leave intake
becoming entangled m machine
valve closed (Lever Up) until 5 or
more gallons of flushing oil are
Monthly check and if necessary
7
introduced, then push lever down,
clean 3" overflow tube to insure
opening intake valve
tube has not become clogged
Note After flushing operations,
10
Keep unit clean for safety and
drain residual material before
operation
subsequent recirculaton.
22