TM 5-3895-385-23-2
0432
Beacon Light Removal -- Continued.
WARNING
Engine covers do not stay open unaided. They must be held open or supported while working
inside engine hood assembly. Failure to comply may cause injury or death to personnel.
CAUTION
Tag and label electrical wiring and connections prior to removal. Electrical wiring must be
installed correctly for proper operation. Failure to comply may cause damage to equipment.
1. Open engine cover (Figure 1, Item 8), and remove nut (Figure 1, Item 7) and beacon light wiring harness
ground wire (Figure 1, Item 5) from engine hood assembly bolt (Figure 1, Item 6).
2. Disconnect beacon light wiring harness power wire (Figure 1, Item 3) from W1 J49 (Figure 1, Item 4).
3. Remove wing screw (Figure 1, Item 9) and upper beacon light mount (Figure 1, Item 11) along with beacon
light (Figure 1, Item 1) from lower beacon light mount (Figure 1, Item 10).
4. Remove beacon light (Figure 1, Item 1) from upper beacon light mount (Figure 1, Item 11).
NOTE
Stop here if removing beacon as a precondition for removing the top cover.
5. Disconnect beacon ground wire (Figure 1, Item 12) from beacon light wiring harness ground wire (Figure 1,
Item 5).
6. Disconnect beacon power wire (Figure 1, Item 2) from beacon light wiring harness power wire (Figure 1, Item
3).
7. Remove beacon light wiring harness ground wire (Figure 1, Item 5) and beacon light wiring harness power
wire (Figure 1, Item 3) from upper beacon light mount (Figure 1, Item 11).
END OF TASK
Beacon Light Installation
1. Connect beacon ground wire (Figure 1, Item 12) to beacon light wiring harness ground wire (Figure 1, Item 5).
2. Connect beacon power wire (Figure 1, Item 2) onto beacon light wiring harness power wire (Figure 1, Item 3).
3. Install beacon light (Figure 1, Item 1) onto upper beacon light mount (Figure 1, Item 11).
4. Install upper beacon light mount (Figure 1, Item 11) along with beacon light (Figure 1, Item 1) and wing screw
(Figure 1, Item 9) onto lower beacon light mount (Figure 1, Item 10).
