TM 5-3895-385-23-2
0389
Right Screed Worklight Wiring Harness Removal -- Continued.
Figure 2. Right Screed Worklight Wiring Harness -- Removal/Installation.
END OF TASK
Right Screed Worklight Wiring Harness Installation
1. Route right screed worklight wiring harness through pass-through (Figure 2, Item 6).
2. Install two bolts (Figure 2, Item 2), flat washers (Figure 2, Item 3), and clamps (Figure 2, Item 1) onto screed.
3. Connect W20 J2 (Figure 2, Item 5) onto right screed worklight (Figure 2, Item 4).
4. Connect W20 J1 (Figure 1, Item 2) onto W1 J41 (Figure 1, Item 1).
END OF TASK
FOLLOW-ON TASK
1. Install cable ties where necessary.
2. Turn BATTERY DISCONNECT switch ON (TM 5-3895-385-10).
END OF TASK
END OF WORK PACKAGE
0389-3/4 blank