TM 5-3895-385-23-2
0389
Right Screed Worklight Wiring Harness Removal
Figure 1. Right Screed Worklight Wiring Harness -- Disconnect/Connect.
1. Disconnect W20 J1 (Figure 1, Item 2) from W1 J41 (Figure 1, Item 1).
2. Disconnect W20 J2 (Figure 2, Item 5) from right screed worklight (Figure 2, Item 4).
3. Remove two bolts (Figure 2, Item 2), flat washers (Figure 2, Item 3), and clamps (Figure 2, Item 1) from
screed.
4. Remove right screed worklight wiring harness from pass-through (Figure 2, Item 6).
