TM 5-3895-385-23-2
0378
Screed Wiring Harness Removal -- Continued.
Figure 7. Right Screed Control Wires from Connector -- Removal.
14. Insert electrical contact extraction tool into connector (Figure 7, Item 1), and press down on locking tab
(Figure 7, Item 2). Remove six wires (Figure 6, Items 5 and 8) from W6 J4 (Figure 6, Item 10) and W6 J5
(Figure 6, Item 3) while pressing down on locking tab (Figure 7, Item 3).
15. Remove wire (Figure 6, Items 5 and 8) from rear grommets (Figure 6, Items 4 and 9).
16. Remove star nut (Figure 6, Item 6) from housing (Figure 6, Item 7).
17. Remove six wires (Figure 6, Items 5 and 8) from screed control box.
