TM 5-3895-385-23-2
0348
EXHAUST MANIFOLD REMOVAL AND INSTALLATION
Exhaust Manifold Removal
Figure 1. Exhaust Manifold -- Removal/Installation.
1. Remove eight bolts (Figure 1, Item 4), sleeve spacers (Figure 1, Item 3), and exhaust manifold (Figure 1, Item
5) from cylinder head (Figure 1, Item 2).
2. Remove four exhaust manifold gaskets (Figure 1, Item 1) from cylinder head (Figure 1, Item 2). Discard
gaskets.
CAUTION
The exhaust opening in the cylinder head should be covered to prevent dirt and debris from
entering engine. Failure to comply may cause damage to equipment.
3. Remove dirt, debris, and residual gasket material from exhaust manifold (Figure 1, Item 4) and mounting
surface of cylinder head.
END OF TASK