TM 5-3895-385-23-2
0324
Crankshaft Front Oil Seal Installation
Figure 5. Crankshaft Front Oil Seal ― Installation.
CAUTION
Prior to installing new crankshaft front oil seal, clean all oil and seal residue from crankshaft
nose and crankshaft front oil seal seat. Failure to comply may cause improper installation and
damage to equipment.
Use of impact wrench or air tools may damage the crankshaft seal replacer tool. Failure to
comply may cause damage to equipment.
1. Lubricate crankshaft front oil seal (Figure 5, Item 1) with clean engine oil.
2. Install crankshaft front oil seal (Figure 5, Item 1) over crankshaft nose (Figure 5, Item 2) and as far as
possible into crankshaft front oil seal (Figure 5, Item 1) seat.
3. Install replacer screw (Figure 5, Item 3) onto crankshaft nose (Figure 5, Item 2), and install two bolts (Figure
5, Item 5) found in crankshaft oil seal replacement kit.
