TM 5-3895-385-23-2
0266
PEDESTAL ASSEMBLY KEYPAD REMOVAL AND INSTALLATION
NOTE
The procedure is the same for all pedestal assembly keypads. Screed beacon keypad shown.
Pedestal Assembly Keypad Removal
Figure 1. Pedestal Assembly Keypad.
1. Disconnect plug (Figure 1, Item 4) from keypad connector (Figure 1, Item 2).
2. Remove two locking nuts (Figure 1, Item 5) from keypad posts (Figure 1, Item 1). Discard locking nuts.
3. Remove pedestal assembly keypad (Figure 1, Item 3) from pedestal assembly.
END OF TASK
Pedestal Assembly Keypad Installation
1. Install pedestal assembly keypad (Figure 1, Item 3) into pedestal assembly.
2. Install two new locking nuts (Figure 1, Item 5) on keypad posts (Figure 1, Item 1).
3. Connect plug (Figure 1, Item 4) into keypad connector (Figure 1, Item 2).
END OF TASK